Последние поступления

Hantek 1025G PC USB Function/Arbitrary Waveform Generator hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
The Hantek 1025G Arbitrary Waveform Generator has one channel of arbitrary waveform output, 12 Bits outputs, synchronized signal output, 1 channel of Counter/Frequency Measurement input, 6 Bits inputs and external trigger input. The user can edit the waveform arbitrarily by the mouse or choose the regular waveforms such as Sine, Square, Tri-angle, Saw-tooth, TTL, White Noise, Gauss Noise, Trapezia, Exponent, AM and FM. Features Cost-effectiveness; PC USB Function/Arbitrary Waveform Generator. Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has good heat resistance and strong wearability. Plug & Play USB interface, no external power source required; Similar operation interface to benchtop waveform generators, easy to use. It can be used disengaging the computer. Simulation of sensors and Real Word Signals. It will produce the needed arbitrary waveform signals when power on. 200MSa/s sample rate, 12 bits of vertical resolution; 25Mz arbitrary waveform output. (Sine wave up to 75 MHz). One computer can be linked with several HANTEK1025G to expand Multi-channels. 50 MHz Frequency Counter. Programmable Pattern Generator. Standard USBXITM interface, easyly inserts into USBXITM housing to make up a combination instrument. Support System: Win 7, Windows NT, Windows 2000, Windows XP. Specifications Arbitrary Waveform Output Wave frequency DC~25MHz DAC clock 2K~200MHz adjustable Channels 1CH waveform output Waveform Length 4KSa Vertical Resolution 12 bit Frequency stabilization 100KΩ Pattern Generator Digit 12 Bits Pattern Generator and 6Bit digital In Type LVCMOS Working Environment Temperature 0~70 centigrade Humidity 0~95% Package Weight 500g Package Size 23 x 13 x 11 cm
8830.78 RUR
Hantek DDS-3X25 DC 25 MHz PC USB Arbitrary Waveform Generators hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Features High performance/price ratio, PC USB Function/Arbitrary Waveform Generator. It can be used disengaging the computer. Simulation of sensors and Real Word Signals. It can be used as the other products signal generator module. It will produce the needed arbitrary waveform signal when power on. 200MSa/s of sample rate, 12 bits of vertical resolution. 25MHz Arbitrary waveform output. (sine wave up to 75MHz). One computer can be linked with several DDS-3X25 to expand Multi-channels. 50MHz Frequency Counter. 12bits Pattern Generator. USB interface, plug and play, no power needed, the volume is small and the weight is light, easy to schlep. Operating system: Windows NT, Windows 2000, Windows XP. Specifications Arbitrary Waveform Output Wave frequency DC~25MHz DAC clock 2K~200MHz adjustable Channels 1CH waveform output Waveform Length 4KSa Vertical Resolution 12 bit Frequency stabilization 100KΩ Pattern Generator Digit12 Bits Pattern Generator and 6Bit digital in Type LVCMOS Temperature 0~70 centigrade Humidity 0~95% Package Size 25 x 18 x 15 cm Package Weight 350g
8290.08 RUR
FY3224S 24MHz Dual-channel Arbitrary Waveform DDS Function Signal Generator Sine Square Wave Sweep Counter hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Description: FY3224S 24MHz Dual-channel Arbitrary Waveform DDS Function Signal Generator Sine Square Wave Sweep Counter Features: Output signal frequency high accuracy, good stability. Signal amplitude up to 20Vpp. Instrument can realize the adjustment program of function parameters easy to use. Accompanying frequency meter, counter function, high cost. The instrument can output sine, square, triangle, ramp, pulse, staircase, DC voltage waveform. Pulse wave pulse width precision can be adjustable. Function: 1. Using DDS direct digital synthesis technology to generate precise, stable, low distortion output signal. 2. CH1 and CH2 completely symmetrical two channels, each channel can be independently set the parameters. 3. Supports user-defined waveforms, each arbitrary waveform memory depth 2048 x 12bits, 250MSa / s sampling rate. 4. Has burst burst output, selectable manual trigger, internal and external trigger CH2 trigger three trigger modes that allow the unit to any output 1 - 1048575 bursts. 5. Measurement functions: instrument comes with 100MHz frequency counter functions and pulse counter functions. 6. Waveform generator up to 12 bits wide, the output waveform is more delicate, waveform distortion is reduced magnitude. 7. With full CNC functions, display and digital adjustment phase current amplitude of the output signal, offset, frequency, duty cycle, and the two signals. 8. After connecting the instrument to the computer, you can use the computer through the PC control signal generator functions and parameters, and can be edited on a computer to download arbitrary waveform output waveform to the instrument. 9. Communication: serial communication, protocol completely open, user-friendly secondary development. 10. High frequency accuracy: frequency accuracy up to 10-6 magnitude. 11. High frequency resolution: the full range of frequency resolution 10mHz. 12. Tracking function: built-in frequency, amplitude, offset, duty cycle, waveform and other parameters follow function, easy to use. 13. Scanning features: a frequency linear sweep and logarithmic sweep function, scan start and end points can be set. 14. Storage feature: You can store 20 groups instrument state parameters set by the user, can be called up to Reproduce 15. Operation: key operation, LCD1602 LCD display in English, direct digital setting parameters or continuous adjustment knob. 16. Input voltage protection: extended power input range AC85V to AC240V wide voltage. 17. Output short circuit protection: All signal outputs can operate at over load short circuit 60S. Technical Parameters: Built-in switching power supply: AC85V-AC260V Interface: USB Signal output: Output amplitude: 20Vp-p (no load) Output Impedance: 50 10% DC polarization: 10V Frequency range: 0Hz - 24MHz (orther 0Hz - 6MHz) Counter: Count range: 0-4294967295 Measurement frequency range: 1Hz - 100MHz Input amplitude: 1Vp-p - 20Vp-p Scan function: Scanning mode: Linear sweep, logarithm scanning Frequency Range: Start and end points set arbitrary Frequency scanning range: M1 - M2 predetermined frequency Scan rate: 1s ~ 999s / step Other: Storage and transferred functions: M0 - M9 (M0: default) Size: 200mm (L) 190mm(W) 90mm(H) Beeper function: to set open or closed by the program Operating characteristics: All key operation, continuous adjustment knob Environmental conditions: Temperature 0 - 40 humidity >>CLICK HERE to download all the files in the CD
69.99 RUR
Hantek DSO3062AL 60MHZ 5in1 Oscilloscope 16CH logic analyzer Waveform Generator hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Features 2 Channel and EXT trigger, 60MHz Bandwidth. 200MSa/s real-time sampling rate, 10k—16M memory depth per channel. 25MHz arbitrary waveform output, (sine wave can deliver up to 75MHz) 200MSa/s DDS, 12bits of vertical resolution. Frequency Counter, FFT spectrum analysis. 8--36V Wide range of input voltage, suitable for vehicle power test. USB 2.0 interface, LAN optional. More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application. Excellent industrial design, similar interface with bench oscilloscope, easy to use. Software support: Windows NT, Windows 2000, Windows XP, VISTA, Win 7, Win 8. Supply DEMO code (VC, VB, LABVIEW) and technical support. Specifications Vertical System Analog Channels 2 Bandwidth 60MHz(-3dB) Rise Time 5.8ns Input Impedance Resistance: 1MΩ; Capacitance: 25 pF Input Sensitivity 10mV/div to 5V/div Input Coupling AC/DC/GND Vertical Resolution 8 bits Memory Depth 10K-16M/CH Maximum Input 400V (DC+AC Peak) Horizontal System Real-Time Sampling Rate 200MS/s Time BaseRange 5ns/div to 1000s/div(1-2-5 sequences) Time Base Precision ±50ppm Trigger System Source CH1, CH2, D0-D15, EXT Mode Edge,Pulse,Viedo,Alternative X-Y MODE X-Axis Input CH1 Y-Axis Input CH2 Phrase Shift Max.3 degree Cursors and Measurement Voltage Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot Time Measurement Frequency,Period, Rise Time, Fall Time, PositiveWidth, Negative Width, Duty Cycle Cursors Measurement Horizontal ,Vertical, Track, Auto Measure Modes Waveform Signal Process +,- , x,÷, FFT, Invert AUTO SET Yes Voltage Range 10mV to 5V/div @ x 1 probe100mV to 50V/div @ x 10 probe1V to 500V/div @ x 100 probe10V to 5000V/div @ x 1000 probe100V to 50000V/div @ x 10000 probe200mV to 100V/div @ 20:1 Current Range CC65(20A),CC65(60A),CC650,CC1100 FFT Rectangular, Hanning,Hamming, Blackman Window Math Adition, subtraction, multiplication, division Arb. Wavefrom Generator Mode Waveform Frequency DC~25MHz DAC 2K~200MHz adjustable Frequency Resolution 0.10% Channel 1CH waveform output Waveform Depth 4KSa Vertical Resolution 12 bit Frequency Stability
24511.04 RUR
DIY 555 Multi-wave Signal Generator Circuit Kit hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
DIY 555 Multi-wave Signal Generator Circuit Kit Description: Output circuit and peripheral components NE555 multivibrator, the output waveform is a rectangular wave, by adjusting the duty cycle of the rectangular wave can form a square wave, and further processing by integrating the conversion circuit can form a variety of waveform output waveforms including square, bell, triangle wave and sine wave. The frequency of the output waveform of the circuit is about 1000Hz, waveform amplitude 0-200mv Package included: 1 x DIY 555 Multi-wave Signal Generator Circuit Kit
2.26 RUR
Hantek 6022BE PC-Based USB Digital Storage Oscilloscope 2Channels 20MHz 48MSa/s hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Features Great industrial design, the high quality anodized aluminum case is extremely durable and heat-resistant. Standard USBXI(TM) interface, easily inserts into USBXI(TM) housing to make up a combination instrument. USB2.0 interface, no external power source required, easy to use. Be suitable for notebook computer, product line maintenance, be used easily on business. High performance, 48MSa/s real-time sampling, 20MHz bandwidth. 16 channels logic analyzer, 20MHz bandwidth. Operating system: Windows 7, Windows NT, Windows XP ,VISTA. More than 20 kinds of automatic measurement functions. Intensity, invert, addition, subtraction, multiplication, division, X-Y plot. Saves waveform on screen in JPG/BMP, Excel formats. FFT spectral analysis function. One computer can connect many DSO, extend channel easily. Specifications Channel 2 Channels Bandwidth 20MHz Max. Sample Rate 48MSa/s Storage Depth 1M Vertical Resolution 8 Bit Impedance 1MΩ 25pF Coupling DC Voltage Range 20mV-5V, 8Steps Vertical Accuracy ±3% Timebase Range 1ns-5000s, 39 Steps Vertical Adjustable Yes Input Protection Diode Clamping X-Y Yes Horizontal Mode Auto, Normal and Single Trigger Slope +/- Trigger Level Adjustable Yes Trigger Source CH1, CH2 Pre Trigger 0-100% Sampling Selection Yes Waveform Display Port/Line, Intensity Network Open/Close Cursor Measurement Yes Math FFT, Invert, Addition, Subtraction, Multiplication, Division Cursor Display Frequency, Voltage Package Size 23 x 17 x 7.5cm Package Weight 730g Package Contents 1 x Oscilloscope, 1 x USB Cable, 1 x CD, 2 x Probes, 1 x User Manual (English)
3483.87 RUR
HANTEK DSO8202E Handheld Oscilloscope 200MHz 1GS/s hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Features Six in one: Oscilloscope/Recorder/DMM/ Spectrum Analyzer/Frequency Counter/Arbitrary Waveform generator. IP-51 rated for dust, drip and shake proof to withstand harsh environments. Large fuse confirms to European Safety Standard. Battery indicator with easy-changed connect points. Selectable 18650 battery box for matching 18650 battery by yourself. Anti-theft lock hole, tripod fixed hole, hang rope, FLASH light that can be used in darkness. Replaceable BNC safety joints, and additional one set of joints. High bandwidth 100MHz Oscilloscope, 1GSa/s sample rate, 2M Memory depth. 25Mz Arb. Waveform Generator, 200 Mesa/s DDS, 12 bit vertical resolution, easy for simulating transducer 6000 Counts DMM, AC/DC voltage, AC/DC current, resistance, break, capacitance, and diode function. FFT spectral analysis; Waveform Math: add, subtract, multiply and divide; X-Y mode; more than 20 automatic measurements; PASS/FAIL Check function, apply to engineering application. Abundant trigger function, double timebase sampling, easy to observe two waveforms in different frequency. Record and replay of more than 1000 waveforms. Large 5.6 inch TFT Color LCD Display; High Resolution(640*480) USB Host/Device 2.0 full-speed interface; support removable disk; WIFI/LAN Option, easy to control by PC or long-distance. Waveform data can be output in WORD,EXCEL, BMP, JPG as time and voltage. Specifications Model DSO8202E Acquisition Sample Modes Real-Time Sample Acquisition Modes Normal Normal data only Peak Detect High-frequency and randon glith capture Average Wavefom Average, selectable 4,8,16,32,64,128 Inputs Inputs Coupling AC, DC, GND Inputs Impedance 1MΩ±2% 20pF±3pF Probe Attenuation 1X, 10X Supported Probe Attenuation Factor 1X, 10X, 100X, 1000X Maximum Input Voltage CAT I and CAT II: 300VRMS (10×), Installation Category; CAT III: 150VRMS (1×) Horizontal System Sample Rate Range 1GS/s Waveform Interpolation (sin x)/x Record Length 2M SEC/DIV Range 2ns/div~2000s/div, in a 2, 4, 8 sequence Sample Rate and Delay Time Accuracy ±50ppm over any ≥1ms time interval Scanning Speed Range 2ns/div to10ns/div;(-4div×s/div) to 20ms Delta Time Measurement Accuracy (Full Bandwidth) Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns); >16 averages:± (1 sample interval + 100ppm × reading + 0.4ns); Sample interval = s/div ÷ 200 Vertical System Vertical Resolution 8-bit resolution, all channel sampled simultaneously Volts Range 2mV/div to 100V/div at input BNC Bandwidth 200MHz Rise Time at BNC( typical) 1.8ns Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled ±400V(100V/div-20V/div); ±50V(10V/div-5V/div); ±40V(2V/div-500mV/div); ±2V(200mV/div-50mV/div); ±400mV(20mV/div-2mV/div); Math +, -, *, /, FFT FFT Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman; 1024 sample point Bandwidth Limit 20MHz Low Frequency Response (-3db) ≤10Hz at BNC DC Gain Accuracy ±3% for Normal or Average acquisition mode, 100V/div to 10mV/div. ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div. DC Measurement Accuracy, Average Acquisition Mode Measurement Type: Average of ≥16 waveforms with vertical position at zero Accuracy: ± (3% × reading + 0.1div + 1mV) when 10mV/div or greater is selected. Measurement Type: Average of ≥16 waveforms with vertical position not at zero Accuracy: ± [3% × (reading + vertical position) + 1% of vertica Volts Measurement Repeatability, Average Acquisition Mode Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions Package Size 26 x 22 x 10 cm Package Weight 2500g
51485.89 RUR
CKL-54A 4-Port Automatic KVM 250MHz Switch with Cable - White hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Supports Dos / Win3 / Win95 / 98/ 98SE / 2000 / ME / XP / NT / Netware / Unix / LINUX; Plug and play; Supports 1920 x 1440 resolution; Bandwidth: 250MHz
3056.37 RUR
Hantek DSO3202A PC USB Oscilloscope 250MHz bandwidth 2CH 1GSa/s hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Features 2 Channel and EXT trigger, 250MHz Bandwidth. 1GSa/s real-time sampling rate, 265M memory depth per channel. 8--36V Wide range of input voltage, suitable for vehicle power test. USB 2.0 interface, LAN optional. More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application. Excellent industrial design, similar interface with bench oscilloscope, easy to use. Software support: Windows NT, Windows 2000, Windows XP, VISTA, Win 7, Win 8. Supply DEMO code (VC, VB, LABVIEW) and technical support. Specifications Vertical System Analog Channels 2 Bandwidth 250MHz(-3dB) Rise Time 5.8ns Input Impedance Resistance: 1MΩ; Capacitance: 25 pF Input Sensitivity 10mV/div to 5V/div Input Coupling AC/DC/GND Vertical Resolution 8 bits Memory Depth 256M/CH Maximum Input 400V (DC+AC Peak) Horizontal System Real-Time Sampling Rate 1GSa/s Time Base Range 5ns/div to 1000s/div(1-2-5 sequences) Time Base Precision ±50ppm Trigger System Source CH1, CH2, EXT Mode Edge,Pulse,Viedo,Alternative X-Y MODE X-Axis Input CH1 Y-Axis Input CH2 Phrase Shift Max.3 degree Cursors and Measurement Voltage Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot Time Measurement Frequency,Period, Rise Time, Fall Time, PositiveWidth, Negative Width, Duty Cycle Cursors Measurement Horizontal ,Vertical, Track, Auto Measure Modes Waveform Signal Process +,- , x,÷, FFT, Invert AUTO SET Yes Voltage Range 10mV to 5V/div @ x 1 probe; 100mV to 50V/div @ x 10 probe; 1V to 500V/div @ x 100 probe; 10V to 5000V/div @ x 1000 probe; 100V to 50000V/div @ x 10000 probe; 200mV to 100V/div @ 20:1 Current Range CC65(20A),CC65(60A),CC650,CC1100 FFT Rectangular, Hanning,Hamming, Blackman Window Math Adition, subtraction, multiplication, division General Features Interface USB 2.0(LAN Optional) Power Source 8-36V wide range of input voltage, suitable for vehicle power test. Package Size 29 x 27 x 20 cm Package Weight 300g
25952.9 RUR
DSO-2090 PC-Based 40MHz 2-Channel USB Digital Storage Oscilloscope hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
High performance 100MS/s real-time sampling 40MHz Bandwidth - USB2.0 interface no external power source required easy to use - Supports FFT - More than 20 measurement functions PASS/FAIL Check be suitable for technical application - Waveform average persistence intensity invert addition subtraction multiplication division X-Y plot - Save waveform in the following: text file jpg/bmp graphic file MS excel/word file - Operating system: Windows98/Me/NT/2000/XP/Vista - Package included: - 1 * DSO2090 Oscilloscope - 2 * 60MHz/4MHz Clip Probes - 1 * USB cable - 1 * Software CD - 1 * User manual (English)
9343.65 RUR
Hantek6052BE USBXI 2CH USB Digital Storage Oscilloscope 50MHz 150MS/s hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Features Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has good heat resistance and strong wearability. Standard USBXI TM interface, easily inserts into USBXI TM housing to make up a combination instrument. USB2.0 interface, no external power source required, easy to use. Be suitable for notebook computer, product line maintenance,be used easily on business. High performance, 150MS/s real-time sampling, 50MHz Bandwidth, Operating System: Windows 7, Windows NT, Windows 2000, Windows XP,VISTA. 23 measurement functions, PASS/FAIL Check, be suitable for technical application. Waveform average, persistence, intensity,invert,addition, subtraction, multiplication, division,X-Y plot. Save waveform in the following: text file, jpg/bmp graphic file, MS excel/word file. One computer can connect many DSO, extend channel easily. Labview\VB\VC\Delphi\C++Builder Second Design instance. Specifications Channel 2 Channels Bandwidth 50MHz Shot bandwidth DC to 50MHz Input Impedance 1MΩ 25pF Max. Sample rate 150MS/s Coupling AC/DC/GND Vertical resolution 8Bit Gain range 10mV-5V, 9Steps DC accuracy ±3% Timebase range 4ns-1h, 38 Steps Vertical adjustable Yes Input protection Diode clamping X-Y Yes Autoset Yes (30Hz to 50MHz) EXT. input Yes Trigger Mode Auto, Normal and Single Trigger Slope +/- Trigger level adjustable Yes Trigger Type Rising edge, falling edge Trigger Source CH1, CH2, EXT Pre/Post trigger 0-100% Buffer size 10K-64KB/Channel Sampling selection Yes Waveform Display port/line, waveform average, persistence, intensity Network Open/Close Vertical mode CH1, CH2, Dual, ADD Cursor measurement Yes Math FFT, addition, subtraction, multiplication, division. Cursor Frequency, Voltage Data Samples 10K-64K/Channel Accessories S/W CD, probes, manual, USB cord Package Weight 900g Package Size 30 x 20 x 15 cm
11113.73 RUR
Hantek DSO3102 Automotive Diagnostic USB Oscilloscope hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Features 256M memory depth;. 2/4 channel and EXT trigger. 60-250MHz bandwidth. 1GSa/s real-time sampling rate. 8--36V Wide range of input voltage,suitable for vehicle power test. More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application. Excellent industrial design, similar interface with bench oscilloscope, easy to use. Software support: Windows NT, Windows 2000, Windows XP, VISTA, Win7, Win8. Supply DEMO code(VC, VB, LABIEW) and technical support. Specifications Vertical   Channels 2 Bandwidth 60MHz Rise Time 5.8ns Input Impedance Resistance: 1MΩ; Capacitance: 25 pF Input Sensitivity 10mV/div to 5V/div Input Coupling AC/DC/GND Vertical Resolution 8 bits Memory Depth 10K-256M/CH Maximum Input 400V (DC+AC Peak) Horizontal   Real-Time Sampling Rate 1GSa/s Time Base Range 5ns/div to 1000s/div(1-2-5 sequences) Time Base Precision ±50ppm Trigger   Source CH1, CH2, EXT CH1, CH2,CH3, CH4, EXT Mode Edge, Pulse,Video, Alternative Auto Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle Cursors Measurement Horizontal ,Vertical, Track, Auto Measure Modes Waveform Signal Process +,- , x,÷, FFT, Invert Voltage Range 10mV to 5V/div @ x 1 probe100mV to 50V/div @ x 10 probe1V to 500V/div @ x 100 probe10V to 5000V/div @ x 1000 probe100V to 50000V/div @ x 10000 probe200mV to 100V/div @ 20:1 Current Range CC65(20A),CC65(60A),CC650,CC1100 FFT Rectangular,Hanning,Hamming,Blackman Window Math Adition,subtraction,multiplication,division INTERFACE USB 2.0 POWER SOURCE 8--36V Wide range of input voltage,suitable Package Size 40 x 30 x 15 cm Package Weight 4.0kg
16700.95 RUR
Hantek DSO-2250 USB 2.0 100MHz 2-Channel Digital Oscilloscope hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Compatible with USB 2.0/1.1 - Small and easy to carry - 250 MSa/s sample rate - 100MHz bandwidth - Coupling: AC/DC/GMD - Display: Y-T/X-Y - Over20 measurement functions with PASS/FAIL check - Waveform average persistence intensity invert addition subtraction multiplication division XY plot - Waveforms can be saved to Excel or Word files - FFT frequency analysis - Interface: USB - Supports Windows 98/Me/2000/XP/VISTA - Package included: PP-150 Probes USB data cable CD English Manual
17124.02 RUR
RIGOL DS1052E 5.6 TFT LCD 50MHz 2-Channel Digital Color Storage Oscilloscope hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
1 GSa/s maximum real-time sample rate 25 GSa/s maximum equivalent-time sample rate - 1Mpts long Memory Depth - 100 MHz 50 MHz Bandwidths - Ultra compact design: 303mm x 154mm x 133mm (WxHxD) - 64K TFT color LCD bright and vivid waveform display - Advanced trigger modes: Edge Video Pulse Width Slope Alternate - Adjustable bigger sensitivity: Effectively filter noise from bigger signal and avoid false trigger - 20 automatic measurements - Cursor measurements: Manual Track and Auto Measure modes - 10 waveforms 10 setups BMP and CSV storage - Math functions: + - x FFT Invert - Special digital filter and waveform recorder - Built-in hardware frequency counter - Standard interface: USB Device USB Host RS-232 - Standard configuration: PassIFail test effectively avoid electromagnetic interference by using photoelectricity-isolation - Multi-language user interface built-in help system - Direct print to PictBridge compatible printers via USB Device interface Model DS1052 Bandwidth 50 MHz Channels Dual Channels + External Trigger Real-time Sample Rate 1 GSa/s ( Single Channel ) 500 MSa/s ( Dual Channels ) Equivalent-time Sample Rate 10GSa/s Rise Time 7ns Timebase Range 5 ns/div ~50s/div Trigger Modes Edge Video Pulse Width Slope Alternate Vertical Resolution 8 bits Vertical Sensitivity 2 mV/div ~10V/div Maximum Input Voltage All inputs 1MO 15pF 300V RMS CAT Input Coupling DCACGND Roll Range 500ms/div ~50s/div Cursor Measurements ManualTrack and Auto Measure modes Math + - × FFT Internal Stroge 10 Waveforms and 10 Setups USB Storage BMP CSV Waveforms and Setups Connectivity USB Device USB Host RS-232 P/F Out Display 5.6 " TFT (64 k Color LCD ) 320×234 resolution Power Supply AC:100 ~ 240 VACRMS 45 ~ 440 Hz CAT II 50 VA Max
23470.11 RUR
DSO150 AVR core Portable 2.1 GLCD Digital Storage Oscilloscope - Green + Black + Silver hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Brand N/A Model DSO150 AVR core Quantity 1 Color Green + Black + Silver Material PCB Features Dual channels DC without coupling; Max. input voltage: 5V; Sampling rate: 250K; Powered by USB; AVR 8-bit core; 5.9 x 5.5 x 2.4cm; 128 x 64 2.1" GLCD display; KS0108 driver IC; Axis tilt: 5%; Trigger electric level: 0~5.1V LCD Display 2.1" GLCD Display Resolution 128 x 64 Analog bandwidth 250K Max sample rate 500Kps 8-bit Sample memory depth 250K Horizontal sensitivity 100us--500ms Horizontal position Adjustable Vertical sensitivity 0~5V Vertical position Adjustable Display Language English Power Supply USB or 3.7V battery (not included) Packing List 1 x Oscilloscope 1 x USB cable (100cm) 1 x Probe (24cm)
2626.34 RUR
UNI-T UTD2025CL 7.0 LCD 2-CH 25MHz 250Ms/s Benchtop Digital Storage Oscilloscope hantek6254bd oscilloscope 4 channels 6254bd arbitrary waveform generator 250mhz bandwidth powered by usb2 0 interface
Model: UNI-T UTD2025CL - Color: White + grey - Plastic material housing - 7" LCD display (320 x 240 / 64K color) - Channels: 2 - Bandwidth: 25MHz - Sample rate: 250Ms/s (max.) - Rise time: no more than 14ns - Memory depth: 25kpts - Waveform capture rate: No less than 2000wfms/s - Vertical sensitivity: 1mV/div~20V/div - Time base range: 10ns/div~50s/div - Storage modes: Setting waveform bitmap - Trigger modes: Edge pulse video alternate - Interface: USB OTG Pass/Fail - Language: English Spanish Portuguese German Dutch Russian Traditional Chinese Simplified Chinese - Package includes: - 1 x Oscilloscope - 1 x USB cable (100cm) - 1 x Power adapter (3-flat-pin plug / AC 110~220V / 120cm-cable) - 2 x Probe cable (80cm-cable) - 1 x Adjustment tool - 4 x Marker ring - 2 x Tip locating sleeve - 1 x Software CD - 1 x English operating manual - 1 x Chinese / English instruction
17341.56 RUR