Последние поступления

Mini DC Adjustable Power Supply Buck Module Step Down Module dc dc step down module adjust current voltage power supply module green
Mini DC Adjustable Power Supply Buck Module Step Down Module Description: Module Properties: Non-isolated step-down module (BUCK) Rectification: Synchronous rectification Input voltage: DC 4.75V-23V Output voltage: DC 1.0V-17V (Adjustable, Output < Input) Output current: Rated current 1.8A (3A MAX, can not be prolonged) Output ripple: 30mV (no-load) Dimension: 17 x 11 x 4mm(L x W x H) / 0.67'' x 0.43'' x 0.16'' approx Weight: 1g (per.) Package included: 1 x Mini DC-DC step-down adjustable module
1.42 RUR
5Pcs Mini DC Adjustable Power Supply Buck Module Step Down Module dc dc step down module adjust current voltage power supply module green
5Pcs Mini DC Adjustable Power Supply Buck Module Step Down Module Description: Module Properties: Non-isolated step-down module (BUCK) Rectification: Synchronous rectification Input voltage: DC 4.75V-23V Output voltage: DC 1.0V-17V (Adjustable, Output < Input) Output current: Rated current 1.8A (3A MAX, can not be prolonged) Output ripple: 30mV (no-load) Dimension: 17 x 11 x 4mm(L x W x H) / 0.67'' x 0.43'' x 0.16'' approx Weight: 1g (per.) Package included: 5 x Mini DC-DC step-down adjustable module
3.5 RUR
DC-DC Step Down Power Supply Adjustable Module With LCD Display With Housing Case dc dc step down module adjust current voltage power supply module green
DC-DC Step Down Power Supply Adjustable Module With LCD Display With Housing Case Specifications: Converter type: DC-DC Input voltage: 5~23V (Best voltage 20V) Output voltage: 0V~16.5V (Continuously adjustable) Peak current: 3A Mainboard size: 50mm x 30mm x 12mm(LxWxH) Display module: STN LCD LCD size: 37.5mm x 17.0mm(LxW) LCD accuracy: 1% Conversion efficiency: 95% Load regulation S(I):
5.99 RUR
Mini DC-DC Converter Step Down Module Adjustable Power Supply dc dc step down module adjust current voltage power supply module green
Mini DC-DC Converter Step Down Module Adjustable Power Supply Description: This is a DC power step down converter module that is ultra light weight, just the size of a finger nail. This Mini DC-DC Adjustable Step Down Converter is used for DIY mobile power, monitor power supply, buggies power, camera power supply, car power, communications equipment supply, there are a variety of size and weight for demanding situations (such as aviation models,etc.) Specification: Colour: Blue or Green (Delivery random) Input voltage: 4.5V ~ 28V Output voltage: 0.8V ~ 20V Output current: rated current is 2A, maximum 3A (Additional heatsink is required) Conversion efficiency: 96% (Highest) Output ripple: < 30mV Switching frequency: 1.5MHz (Highest) 1MHz (typically) Work temperature: -45C to +85C Potentiometer adjustment direction: clockwise (decrease) counter clock wise (decrease increase) Dimension: 22 x 17 x 4mm (L x W x G) Note: This can't be used to step up voltage Package included: 1 x Mini DC-DC converter step down module
1.53 RUR
DC-DC Step Down Power Supply Adjustable Module With LCD Display Without Housing Case dc dc step down module adjust current voltage power supply module green
DC-DC Step Down Power Supply Adjustable Module With LCD Display Without Housing Case With housing case version: 1038740 Specifications: Converter type: DC-DC Input voltage: 5~23V (Best voltage 20V) Output voltage: 0V~16.5V (Continuously adjustable) Peak current: 3A Mainboard size: 50mm x 30mm x 12mm(LxWxH) Display module: STN LCD LCD size: 37.5mm x 17.0mm(LxW) LCD accuracy: 1% Conversion efficiency: 95% Load regulation S(I):
4.83 RUR
DC-DC Synchronous Rectification Power Module LM2596 w/ Voltage Display - Green dc dc step down module adjust current voltage power supply module green
Model I061801 Quantity 1 Color Green Material CCL Features Input voltage: 4.5-24V Output voltage: 0.9V-20V Output current: 2A Output power: Max 20W Application Synchronous Rectification Power Module Packing List 1 x Power module
640.17 RUR
DC 4.5~30 to 1.25~26V Buck Converter Step-Down Switching Power Supply Module dc dc step down module adjust current voltage power supply module green
Model 3100169 Quantity 1 Color Green Material Glass fiber Features Adjustable input voltage: 4.5~30V adjustable output voltage: 1.25~26V (require input voltage high than output voltage) Max. output: 20W (2A) Packing List 1 x Module
297.01 RUR
DC-DC Converter Step Down Module UBEC 3A 5V / 12V BEC For RC Airplane FPV dc dc step down module adjust current voltage power supply module green
DC-DC Converter Step Down Module UBEC 3A 5V / 12V BEC For RC Airplane FPV DC-DC Converter Step Down Module UBEC 3A 5V / 12V BEC For RC Airplane FPV Description: Output Current: constant 3A Provide two version to choose:5V/12V Suitable For: RC Airplane ,FPV Input voltage: 2-6S(5V version),4-6S(12V can power supply to pan-tilt image transmission.) Features: Mini UBEC Special for FPV image transmission UBEC voltage converter to create 5V/12V ouput voltage from 2-6S/4-6S battery pack input voltage. The UBEC is ideal to provide FPV cameras and GoPro brushless gimbals with a constant 5V/12V voltage. Package Included: 1x5V/12V FPV UBEC
2.25 RUR
48V Adjustable Step-down Module DC-DC LM2596HVS Enter 4.5-60v Electric dc dc step down module adjust current voltage power supply module green
48V Adjustable Step-down Module DC-DC LM2596HVS Enter 4.5-60v Electric Car Regulated Power Supply
265.36 RUR
Mini MP1584 DC-DC Adjustable Buck module 3A 4.5~28V Input 0.8~20V Output Step Down Voltage Regulator dc dc step down module adjust current voltage power supply module green
Mini MP1584 DC-DC Adjustable Buck module 3A 4.5~28V Input 0.8~20V Output Step Down Voltage Regulator
103.49 RUR
DC-DC Step Down Adjustable Constant Voltage Current Power Supply Module dc dc step down module adjust current voltage power supply module green
DC-DC 10A Step Down Adjustable Constant Voltage Current Power Supply Module Module parameters: Scope: High-power LED constant current driver, rechargeable lithium batteries (including ferroelectric) 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride batteries (battery) charging, solar panels, wind generators Input voltage: 7-40V Output voltage: continuously adjustable (1.25-35V) (applied to the input voltage is higher than the output voltage applications can boost) Output Current: 8A, 10A maximum time within the (power tube temperature exceeds 65 degrees, please add cooling fan, 24V 12V 5A turn within generally be used at room temperature without a fan) Constant Range: 0.3-10A (adjustable) module over 65 degrees, please add fan. Turn lights Current: current value * (0.1) turn the lamp current and constant value linkage, such as constant value of 3A, turn the lamp current is set to a constant current of 0.1 times (0.1 x 3A = 0.3A) when the constant 2A, when adjusted to the current value, then turn the lamp current constant current of 0.1 times (0.1 x 2A = 0.2A). This version is a fixed 0.1 times (actually turn the lamp current value is probably not very accurate) is full of instructions for charging. Minimum pressure: 1V Conversion efficiency: up to about 95% (output voltage, the higher the efficiency) Operating frequency: 300KHZ Output Ripple: about the ripple 50mV (without noise) 20M bandwidth (for reference) Input 24V Output 12V 5A measured Operating temperature: Industrial grade (-40 to + 85 ) (please note the actual use of the power tube temperature, the temperature is too high, please enhance heat dissipation) No-load current: Typical 20mA (24V switch 12V) Load regulation: 1% (constant) Voltage Regulation: 1% Constant accuracy and temperature: the actual test, the module temperature changes from 25 degrees to 60 degrees, the change is less than 5% of the current value (current value 5A) Dynamic response speed: 5% 200uS Potentiometer adjustment direction: clockwise (increase) counterclockwise (decrease) Indicator: color indicator, charging indicator light red, fully charged light green (no load is green) Output short circuit protection: Yes, constant current (constant current setting values) Input reverse polarity protection: None, Output anti-anti-perfusion: no, for charging the battery needs additional two diodes. Connection: Terminals Package included: 1 x DC-DC Step Down Adjustable Power Supply Module
6.56 RUR
LM317 Adjustable Voltage Regulator Step Down Power Supply Module dc dc step down module adjust current voltage power supply module green
LM317 Adjustable Voltage Regulator Step Down Power Supply Module With LED Meter Feature: Board core components: adjustable regulator ASIC LM317, 2A or less can be loaded, AC or DC voltage input, the output voltage is 1.25V-28V DC continuously adjustable, versatile DC board. Using double adjustment potentiometer: when using LM317T for adjustable power supply, often lead to output voltage increases and burned the load due to potentiometer poor contact. We designed this regulator board using double potentiometer to ensure good contact, effectively protect the load. Specification: Input: DC 0V ~ 30V / AC 0V ~ 22V Output: DC 1.25V ~ 28V Output current: 2A Max. The minimum differential between input and output: 3V, input must be higher than the output voltage above 3V to be regulated. Buck, not boost, when input 5V output 1.25V ~ 2V, not 6V. Circuit board size: 69 x 50 x 27mm ( L x W x H ) Note: Due to the digital voltage display module operating voltage is 3V, only when the voltage is higher than 3V to display properly Package included: 1 x LM317 adjustable voltage regulator step-down power supply module with LED meter
5.35 RUR
LED Driver Charging Constant Current Voltage Step Down Buck Module dc dc step down module adjust current voltage power supply module green
LED Driver Charging Constant Current Voltage Step Down Buck Module Feature: This module uses the LM2596 chip, high efficiency (up to 92%) low heat, can be very easily used to above 3A current, in conjunction with the original TI op amp control output current, so the overall output is very stable. This module uses the original Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV. This module uses machine placement, reflow soldering. This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential pressure is 2V, the minimum can be output 1.23V. Module indicated IN - (negative input) IN + (positive input) OUT - (negative output) OUT + (positive output) please note must be correct connected, otherwise may cause damage to the module. Description: Nature of the module: Non-isolated step-down module Rectification: Non-synchronous rectification Input voltage: 7V - 35V Output voltage: 1.25V - 30V Output current: Adjustable, 3A (maximum) Transfer efficiency: 92% (maximum) Switching frequency: 150KHz output ripple: 50mV (maximum) 20M Kbps Load regulation: 0.5% Voltage regulation: 2.5% Operating temperature: -40C to +85C Dimension: 48 x 23 x 14mm (L x W x H) Battery charging method: 1. Make sure the battery float voltage and charging current, the module input voltage; 2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V. 3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value; 4. Turn lamp current default is 0.1 times charging current (constant current value) if you need to adjust please adjust the turn lamp current potentiometer; (generally doesn't need adjustment) 5. Adjustment constant potentiometer allows the output voltage reaches the float voltage; 6. Connected to the battery and try to charge. (1,2,3,4,5 steps are for the module input connected to the power supply, output-load battery is not connected.) LED constant current driver using method: 1. Make sure that the drive LED operating current and maximum working voltage; 2. Adjustment constant potentiometer, output voltage adjusted to about 5V. 3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current; 4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED; 5. Connect LED, test machine. (1,2,3,4 steps are module input connect to the power supply, output-load is not connected LED lights.) Package included: 1 x Buck module
3.1 RUR
CazenOveyi dc dc step down module adjust current voltage power supply module green

CazenOveyi

13696.81 RUR
CazenOveyi dc dc step down module adjust current voltage power supply module green
Free Shipping XL6009 DC-DC Booster module Power supply module output is adjustable Super LM2577 step-up module
13696.81 RUR
4A To 6A 24V Switching Power Supply Board AC-DC Power Module dc dc step down module adjust current voltage power supply module green
4A To 6A 24V Switching Power Supply Board AC-DC Power Module Feature: Power Model:XK-2412-24 Protection: overvoltage overcurrent circuit protection AC input: AC85-265V (Global common) AC frequency: 50HZ/60HZ Output voltage: DC 24V Output Current: 4A-6A Output Power: 100W Modulation: Pulse width modulation Package included: 1 x 4A To 6A 24V Switching Power Supply Board AC-DC Power Module
7.99 RUR
Mini DC 7.5~28V to USB Socket DC 5V Step-down Buck Converter dc dc step down module adjust current voltage power supply module green
Mini DC 7.5~28V to USB Socket DC 5V Step-down Buck Converter Power Supply Module
149.74 RUR